南昌附近有没有服务

Dongyuan vibration motor announcement:
Contact Dongyuan
    • Fax: 0373-3356116
    • Tel: 0373-3383880 (Hao SIR)
    • Mobile phone: 15603730073
    • Mobile phone: 18037399900
    • Email: [email protected]
    • Address: Muye Industrial Park, Xinxiang City
    •  Click here to send me a message  Click here to send me a message
Current location:
Dongyuan Homepage > Product display > Vibration motor >High frequency vibration motor
High frequency vibration motor
 High frequency vibration motor
  • Product Name: High frequency vibration motor
  • Product classification: Vibration motor
  • Number of visits: second
  • Product introduction: The product introduces the high-frequency vibration motor. Depending on the frequency modulation power supply, the motor frequency is modulated into high-speed rotation, and the eccentric wheel is driven to do circular motion, so as to generate vibration, and the vibration is transmitted to the end cover and even the casing through the raceway. The vibrator has the advantages of long service life, high efficiency and high vibration
  •  Welcome to QQ online consulting Dongyuan customer service      Welcome to QQ online consulting Dongyuan customer service
Product introduction:
Product introduction
      High frequency vibration motor The frequency of the motor is modulated into high-speed rotation by means of frequency modulation power supply, and the eccentric wheel is driven to make circular motion, so as to generate vibration, and the vibration is transmitted to the end cover and even the casing through the raceway. The vibrator has the advantages of long service life, high efficiency, large amplitude, strong exciting force, no loss of vibration, compact structure, easy to use, few vulnerable parts and easy maintenance. It can be widely used in concrete tamping construction and other occasions where vibration source is needed.
 
Scope of application
 
High frequency vibrator is mainly used for prefabricating concrete precast components of railway, highway, highway bridge and engineering construction. Its vibration frequency is more than three times higher than that of general vibrator. Moreover, the surface of the component after vibration is smooth, and the bubble and shrinkage are significantly reduced. It can save cost, speed up project progress and improve project quality.
 
The following are common models of high frequency vibrator: hd-c50, gz100, gz150, gzf100, gzf150.
 
 
principle
High frequency vibrator is composed of high frequency vibration motor and frequency conversion cabinet.
High frequency vibration motor uses high-speed rotating motor to drive eccentric blocks at both ends to produce centrifugal distance and centrifugal force, which generates vibration to obtain excitation force and impact force. In this way, high frequency resonance will be generated when it is fixed on the template. The power supply and high speed of high-frequency vibration motor are provided by high-frequency frequency conversion cabinet, with power supply (380V), high frequency (0-150hz), and rotating speed (0-11000 RPM). High frequency inverter cabinet is to input the industrial power through the AC module, AC resistance, capacitance and many electrical components in the movement to reverse to DC module output, and change to the required frequency and voltage.
 
 
characteristic
High frequency (180hz, 1.5MHz), high vibration amplitude (180hz, 1.5MHz), high vibration amplitude (1.5MHz), high vibration amplitude (1.5MHz), high vibration amplitude (1.5MHz), high vibration amplitude (1.5MHz), high vibration amplitude (1.5MHz), high vibration amplitude (1.5MHz), high vibration amplitude (1.5MHz), high vibration amplitude (1.5MHz), high vibration amplitude (1.5MHz), high vibration amplitude (1.5MHz). It can run at a high speed of 9800 rpm.
Reduce the loss of formwork. Due to high vibration frequency and small amplitude, less energy is consumed in the deformation of steel formwork and the service life of formwork is prolonged.
Easy to use. Due to its small size, light weight (only 23 kg / set), and the rapid clamping structure, it can be used only by fastening one screw on the template. It only takes 30 seconds to load and unload one set, which saves 75% of installation auxiliary time and 75% of manpower compared with ordinary external vibrator.
Its service life is more than four times that of ordinary vibrator. Due to the high vibration efficiency of ZKF type vibrator, it only takes 30-40 seconds to stop the machine each time. Therefore, the service life of the vibrator is greatly improved, the maintenance cost is reduced and the construction cost is reduced.
Because of the strong exciting force, the high bridge column construction can also be formed at one time.
 
Related products:
 Back to the top
Copyright © 1999-2013 Xinxiang Dongyuan Machinery Co., Ltd . yuicp No. 08102388 111